Need some help with MMDVM/Raspberry Pi

Discussion in 'RFinderPi - Open Source radio interface based on R' started by AC1LC, Dec 11, 2021.

ad: L-HROutlet
ad: l-rl
ad: L-Geochron
ad: L-MFJ
ad: Left-3
ad: l-BCInc
ad: Left-2
ad: abrind-2
  1. AC1LC

    AC1LC Ham Member QRZ Page

    I've got my MMDVM - Raspberry Pi Zero with a hat, set up to run Brandmeister, DMR+, TGIF and YSF. YSF seems to work no matter fact I usually have to change the radio to a different talkgroup because America Link seems to be going non-stop.

    But, DMR/Brandmeister is problematic. I changed my passwords a couple weeks ago on the MMDVM and on Brandmeister. I've made sure that I change it on Brandmeister Self Care and on the Pi-star software in both configuration and then following up by checking the DMR gateway in Expert. For some reason the Brandmeister password on the Pi-star software keeps reverting back to the old one. I then have to go in the three locations on the Pi-star software and reenter the new password then go to Brandmeister Self Care and enter it again there. Then I usually have to reboot the MMDVM to get Brandmeister to connect to it.
    That's problem #1. Problem #2, YSF works great, I can get some of the DMR talkgroups to work but not all of them. And no matter what I do I can't get the DMR Parrot to work. I've used 9990 private and group call, 9998 private and group call, no luck. It shows up on my dashboard and on the Brandmeister Last Heard page that I made the call but I'm not getting the echo return. I don't know what else to look at for that.

    Any suggestions for Problem #1 and Problem #2?

    Screen Shot 2021-12-11 at 12.15.52 PM.png Screen Shot 2021-12-11 at 12.16.23 PM.png Screen Shot 2021-12-11 at 12.16.41 PM.png Screen Shot 2021-12-11 at 12.17.15 PM.png Screen Shot 2021-12-11 at 12.18.17 PM.png Screen Shot 2021-12-11 at 12.18.36 PM.png Screen Shot 2021-12-11 at 12.18.43 PM.png Screen Shot 2021-12-11 at 12.18.54 PM.png
    Last edited: Dec 11, 2021
  2. WM7C

    WM7C XML Subscriber QRZ Page

    I would start with an ESSID for your hotspot. Change it from none to 01.

Share This Page

ad: vanity